With the Slidefix, Renson provides a fabric sun protection solution for both sliding windows, large areas of permanent glass and corner sliding windows. This new type of fabric sun protection follows the sideways motion of a sliding glass door. It’s a motion that’s actually quite logical and, especially, very practical: in this manner, a sliding window also stays perfectly usable as a passageway even with sun protection installed.
When developing this Slidefix, close attention was paid to the invisible integration of the various elements. Both the cassette and the edge guides of the Slidefix are integrated discreetly into the façade. The cassette is recessed behind the hardware, while the certified ‘Connect&Go’ technology still makes it possible to install and uninstall the fabric tube and motor easily. The lower guide is installed in such a way that it fits in at floor level both inside and outside. This lower rail also includes an integrated water drainage system that can be removed easily for maintenance. The end slat also disappears completely into the cassette when the fabric sun protection is completely opened. (In the closed position, it can also slide away invisibly into a special profile mounted against the wall.)
In a double configuration, the Slidefix can be combined to a maximum of 8 m in width without annoying intermediate profiles. The cassette measures 150 mm x 110 mm and can be finished – just as the guides and the end slat – in anodized or powder coated aluminum in all RAL colors. Slidefix controls are electrical and they can be linked to various existing detectors or to a residential automation system.